EdgeChEx 6.0.0 Max 2008-2012 32/64bit FLUX

Information:
This plugin allows to create chamfer (simple and advanced) selected edges
and extrude
new polygons after chamfer.
Requirements:
3ds Max 2008 or higher

PLEASE READ THE INSTRUCTIONS CAREFULLY!!

Installation:
1: Copy the file "EdgeChEx.dlm" from the folder "32-bit" to the subfolder
"plugins" in the root folder of the 3ds Max 32-bit.
and/or
Copy the file "EdgeChEx.dlm" from the folder "64-bit"to the subfolder
"plugins" in the root folder of the 3ds Max 64-bit.
2: Start up 3ds Max (In Admin) and locate EdgechEx in the modifier stack.
3. Locate the Authorization panel in edgechEx and copy the request code
4. Start up the keygen (in Amin) and paste the request code into the Id
box and generate
a serial.
5. Copy the generated serial back into the serial box in EdgeChEx and
click ok
6. Restart Max
7. Flux'd!

also note it will not actually say its registered succesfully it will
just work without these limitations.

Limit for demo version:
Collapse modifier stack
Load and save parameters
Segment chamfering

http://www.filesonic.com/file/1335087884/EdgeChEx_6.0.0_Max_2008-2012_32&64bit_FLUX.zip[/CODE]

http://www.fileserve.com/file/cgXJ4sv/EdgeChEx_6.0.0_Max_2008-2012_32&64bit_FLUX.zip

hhttp://www.uploadstation.com/file/ydtjpJa/EdgeChEx_6.0.0_Max_2008-2012_32&64bit_FLUX.zip

http://www.wupload.com/file/38371169/EdgeChEx_6.0.0_Max_2008-2012_32&64bit_FLUX.zip
Thanks to Lephar for supplying the retail
--------------
CG-softs